30 degree Dies
Acute Press Brake Dies, Punches and Tooling.  CLICK FOR HOMEPAGE.

30 degree Press Brake Die Tooling

We are accedited by the Better Business Bureau! Click to verify A+ Rating We accept credit cards for up to $10,000.

General Purpose 30 degree Forming Punches and Dies - scroll down this page
Acute Dies are the most universal type of press brake dies. Recommended as a starter set. You can make air-form bends from 30 degree to shallow bends. The press brake ram is adjusted to limit the depth of punch travel into the die to obtain the desired bend angle. 30 degree dies can also be used for partial hemming that can be flattened into a full 180 degree hem. Female dies can be purchased with flat top instead of tapered sides. Hardening not recommended for acute angle type tooling due to the higher risk of breakage.

Click for General Purpose 90 degree Forming Punches and Dies
Commonly used for forming 90 degree bends. Forming bends greater than 90 degrees is also practical by air bending.

Click for Gooseneck Punch, Offset, Flattening and Hemming Dies
Hemming dies, Goose Neck die punches for channel making, and Offet Bending die sets.

Click for 3 Way and 4 Way Bottom Dies, Riser Blocks and Die Holders. These bottom dies are for standard straight bending with multiple different width die openings for bending different thicknesses or different types of metal. You can also order them custom made for radius forming. Our riser blocks can be used as die holdes designed to hold 4 way dies or standard dies.

Press Brake Tonnage Requirement Chart

Tensile Strengths for aluminum and stainless

Bend Radius Chart for aluminum and stainless

Hydraulic Press Brake machine page

26 gauge 24 ga. 22 ga. 20 ga . 18 ga. 16 ga. 14 ga. 13 ga. 12 ga. 11 ga. 10 ga. 9 ga. 8 ga. 7 ga. 6 ga.
.018" .024" .030" .036" .048" .060" .075" .090" .105" .120" .135" .150" .164" .180" .194
.46mm .61mm .76mm .91mm 1.2mm 1.5mm 1.9mm 2.3mm 2.7mm 3mm 3.4mm 3.8mm 4mm 4.6mm 4.9mm

General Purpose 30 degree Forming Punches and Dies
Note: Using wider dies than necessary can decrease the tonnage required to make a bend.
The disadvantage of using wider dies is that the minimum size flange you can bend up becomes larger and so does the inside radius.
Options:
* Hook Tongue:
recommended when using a segmented punch in press brakes that are fitted for hooked tongue tooling.

* Polishing: recommended when bending pretty metal that requires minimum marking (without using urethane strips).

Number 21 -punch  16 gauge
Number 21 - 16 Gauge
4 foot $600., 6 foot $750.
8 foot $900., 10 foot $1050.
12 foot $1200, 16 foot $1600. Call for other size prices.

Number 20 die - 1/4 - 22 gauge
Number 20 - 1/4" - 22 Gauge
4 foot $550., 6 foot $650.
8 foot $770., 10 foot $900.
12 foot $1050, 16 foot $1400.
Call for other size prices.
Number 20 die - 3/8 - 18 gauge
Number 20 - 3/8" - 18 Gauge
4 foot $550., 6 foot $650.
8 foot $770., 10 foot $900.
12 foot $1050, 16 foot $1400.
Call for other size prices.
Number 20 die - 1/2 - 16 gauge
Number 20 - 1/2" - 16 Gauge
4 foot $550., 6 foot $650.
8 foot $770., 10 foot $900.
12 foot $1050, 16 foot $1400.
Call for other size prices.

Number 23A punch - 14 gauge
No. 23A - 14 Gauge
4 foot $
650., 6 foot $800.
8 foot $950., 10 foot $1100.
12 foot $1280, 16 foot $1650.
Call for other size prices.

Number  22 die - 5/8 - 14 gauge
No. 22 - 5/8" - 14 Gauge
4 foot $
550., 6 foot $700.
8 foot $850., 10 foot $1000.
12 foot $1100, 16 foot $1450.
Call for other size prices.
Number  23B punch - 12 gauge
No. 23B - 12 Gauge
4 foot $700
, 6 foot $850.,
8 foot $1020, 10 foot $1220
,
12 ft $1420, 16 ft $1800.
Call for other size prices.
Number  22 die - 7/8 - 12 gauge
No. 22 - 7/8" - 12 Gauge
4 foot $
650., 6 foot $800.
8 foot $1000., 10 foot $1200.
12 foot $1330, 16 foot $1660.
Call for other size prices.

Number 23C punch - 10 gauge
No. 23C - 10 Gauge Capacity
4 foot $720
., 6 foot $850.,
8 foot $1040., 10 foot $1230.
,
12 ft $1420., 16 ft $1800.
Call for other size prices.

Number  22 die - 1 inch - 11 gauge
No. 22 - 1" - 11 Gauge
4 foot $
700., 6 foot $880., 8 foot $1050.
10 foot $1270
, 12 ft $1560., 16 ft $1900.
Call for other size prices.
Number  22 die - 1 1/4 - 10 gauge
No. 22 - 1 1/4" - 10 Gauge
4 foot $
900., 6 foot $1100.,
8 foot $1380., 10 foot $1650.
,
12 ft $1800., 16 ft $2200.

Call for other size prices.

Number 23D punch - 3/16 capacity
No. 23D - 3/16 Capacity
4 foot $700
., 6 foot $850., 8 foot $1040., 10 foot $1230,
12 foot $1420., 14 foot $1600., 16 foot $1800.
Call for other size prices.

Number  22 die - 1 1/2 inch - 3/16 capacity
No. 22 - 1 1/2" - 3/16 Capacity
4 foot $
1200., 6 foot $1550. 8 foot $1900., 10 foot $2100,
12 foot $2400., 14 foot $2750., 16 foot
$3100.
Call for other size prices.

Click for American Machine Tools Home page

Privacy Clause

American Machine Tools Co.
5862 Northwest Hwy
Chicago IL 60631 USA
Phone: 773-334-5000
Fax: 773-442-0314

Click to email us

Terms & Conditions

Frequently Asked Questions

Copyright © 2001-2024
American Machine Tools Co.

All rights reserved
Information in this website is subject to change without notice.
Products and Logos in this website are trademarks or registered trademarks of their respective companies or mark holders.
Offers from American Machine Tools Corporation include include Terms and Conditions shown on our website.
Liability is strictly limited to those warranties of fitness for purpose and safety as provided by the manufacturer of the machinery sold.