Ironworker Machine
Edwards hydraulic Ironworker machines in many sizes with many options.  CLICK FOR OUR HOMEPAGE.

Our Hydraulic Ironworker Machines are 20 times faster than your drill press or band saw: Versatile as a swiss army knife.
Buy an Edwards Ironworker 55 ton or larger and get the Powerlink Option for FREE!

American Machine Tools Company is accedited by the Better Business Bureau! Click to verify. A+ RatingWe accept credit cards for up to $10,000.

For hydraulic powered punching of holes of many sizes and shapes, and for cutting, shearing, notching and bending metal flat bar and angle iron. Choose an Ironworker Machine to do it all.
We also offer custom punching, notching and forming dies. These machines take 4 seconds to do what a drill press, saw, or torch does. Ironworkers are the most versatile machine. Scroll down to see all our machines and options below. In our separate Portable Hole Punch Machines webpage we have a 35 ton PortaPunch for on-site structural steel punching and a hand operated 12 station 5 ton turret punch for punching holes in thin metal.

NOTE: A hydraulic Ironworker machine can be very dangerous if used carelessly because it can crush fingers, hands, etc. Always keep hands, fingers, hair and clothing clear. Safety compliance is the users responsibility. You must take it seriously. *** Click for our Machinery Safety webpage ***.

Want an American made hole punching machine that is compact well designed, well built, and uncomplicated? These iron workers offer the biggest tonnage per dollar for a fabrication shop. These machines work on the same principal with the center pulling straight down on the work. The tooling moves vertically, with no arc of a pivot arm. Most models come standard with a punching station, flat bar shear, angle iron shear, and often a coper-notcher. They operate so you can move from punch to plate shear to angle shear to notcher without always changing equipment. Many different sizes and styles of punch & die sets are available such as round, oblong slot, square, rectangle, keyhole, etc. Many kinds of optional tooling is available (coper-notcher, press brake, pipe notcher, angle notcher, rod shear, gaging table, back gauge, multi-hole punching and even radius notching). Scoll down to see our many tool options. These Ironworker machines are shipped ready to operate with hydraulic oil, blades and punches. All you have to do is connect the electricity. The light duty 40 ton and 45 machines plug in anywhere with 115 volts household electricity. The larger Edwards machines come with 208 or 230 volts 3 phase or to use almost anywhere ask for the optional 230 volts, 1 phase electrics available for most machines at $500 extra except 120 ton and 100 Deluxe. 460 volts costs $500 extra. The optional Pipe & Tube Bender attachment, Radius Bender, Horizontal Press Bender, and Hydraulic Shop Press can plug into your Edwards 50 ton or larger Ironworker if you order the hydraulic powerlink connector option. For more information about how these machines work, click to read How to Use an Ironworker Machine.
We give you a free tool box of 8 round punch & die sets with each of our Ironworker Machines. Our 55 Ton and larger machines all include electronic stroke control to limit the up & down movements. The Edwards design comes with ANSI compliant electrical box with lock out-tag out capability, emergency palm stop button and new OSHA compliant safety guards.
Click for a List of our standard Hole Punches available
.
Click for a Chart for Tonnage needed to Punch a Hole.

 

45 Ton MetalPro Ironworker machine $5750.
Max Hole Punching Tonnage: 45 Tons
Power: 110 Volts,
Machine Weight: 550 Lbs.
Made in USA.
Punch capacity: 1/2"
Flat Shear capacity: 1/4 x 8 or 3/8 x 6
Angle Shear capacity: 4 x 4 x 1/4
Rod Shear capacity: 3/4 round, 5/8 square
Optional Tooling Available: Coper-Notcher, Pipe Notcher, 8" Press Brake, 12" Press Brake, Extra large Punching Assembly, Gauging Table for punch, 8" Shelf Extension for shear, Up-down Limit Switch Kit.
Click to Request Our Lower Discount Price and info packet

45 Ton MetalPro Ironworker

 

50 Ton MetalPro Ironworker machine $6750.
Max Hole Punching Tonnage: 50 Tons
Power: 110 Volts,
Machine Weight: 575 Lbs.
Made in USA.
Punch capacity: 1/2"
Flat Shear capacity: 1/4 x 12 or 3/8 x 8
Angle Shear capacity: 4 x 4 x 1/4
Rod Shear capacity: 3/4 round, 5/8 square
Optional Tooling Available: Coper-Notcher, Pipe Notcher, 8" Press Brake, 12" Press Brake, Extra large Punching Assembly, Gauging Table for punch, 12" Shelf Extension for shear, Up-down Limit Switch Kit.
Click to Request Our Lower Discount Price and info packet

50 Ton MetalPro Ironworker

45 Ton Jet Ironworker machine
Made at the Edwards USA factory, this basic Ironworker machine operates on 115 volts power and features 4 workstations including a punching station, flat bar shear, angle shear and a 7size rod shear. A punch & die storage tray is included. The tray holds up to 10 punch & die sets.


Ask for our discount price and we will also include a tool box of 8 round punch & die sets and discounted shipping to most of USA.

Rated Capacity: 45 tons
Punching Capacity (Std): 1 inch diameter through 1/2 inch plate
Flat Bar Shearing @ Max Width: 1/4 x 8 inches
Flat Bar Shearing @ Max Thickness: 3/8 x 6
Angle Shear Max: 3 x 3 x 1/4
Throat Depth: 5-3/4 inches
Round Bar Shear Capacity: 3/4 inch
Square Bar Shear Capacity: 5/8 inch
Stroke: 1-1/2 inches
Motor): 1-1/2 HP, 115 Volts
Hydraulic Pump: 5 gpm @ 2800 psi
Weight: 700 Lbs.
Machine Size:(LxWxH): 24 x 40 x 58 inches.

Click to Request Our Lower Discount Price and info packet

Jet 45 Ton Ironworker Machine

40 Ton "Jaws IV" Edwards Ironworker machine
Click to read every detail about the Edwards 40 ton Ironworker Machine
Made in USA. Our smallest full featured ironworking machine. Has Flat Bar Shear, Angle Shear, removable Punching Head, and it has a hydraulic powered jaw on the right side for any optional tooling.
No electric Stroke Control
7" throat, 8" open height, 1-5/8" stroke
Punches 1" diameter thru 1/2" thick steel plate
Built in Plate Shear cuts 3/8 x 8" steel plate
Built in Angle Shear cuts 3 x 3 x 1/4" angle iron.
Optional Tooling Available: Coper-Notcher, Pipe Notcher, Press Brake, Extra large Punching Assembly, Angle Vee Notcher, Rod Shear, Gauging Table, Back Gauge, Urethane Stripper, etc. Scroll down to see options.
Weight: 1720 pounds.
Electrics: 115 Volts, 1 phase
Click to see the Youtube VIDEO
Scroll down to see optional tooling below.

Ask for our discount price and we will also include a tool box of 8 round punch & die sets and discounted shipping to most of USA..
Click to Request Our Lower Discount Price and info packet

Edwards 40 ton Hydraulic Ironworker Machine with spare hydraulic powered cavity for optional tooling on right side

Edwards 55 Ton "Jaws 4" Ironworker
Click to read every detail about the Edwards 55 ton Ironworker Machine
THIS MACHINE IS NORMALLY IN STOCK.
Made in USA. (heavier and more versatile than the 50 ton machine)
Has Flat Bar Shear, Angle Shear, removable Punching Head, and on the right side any optional extra tooling can fit in the extra hydaulic powered jaw. The 2 versatile power stations can use any 2 sets of tooling including 2 punch heads. Scroll down to see tooling below.
7-1/2" throat, 8-1/8 open height, 1-1/4 stroke
Punch 1-1/16" diameter thru 5/8" thick steel plate
or 1-3/8 dia thru 1/2 with oversize punch option.
Built in Bar Shear cuts 1/2 x 12", 3/8 x 14", 3/4 x 4", 1-1/8 round
Built in Angle Shear cuts 4 x 4 x 1/4" angle or 3 x 3 x 3/8" angle or smaller.
Coper-Notcher 2 x 4 x 5/16" (option shown in photo)
Weight: 2250 pounds.
Electrics: 220 Volts, 3 phase. Optional 440V or 220V, 1 phase.

The 55 ton is Edwards' most popular machine because it is strong, low priced, can hold any two sets of tooling such as a punching head and pipe notcher or press brake and coper-notcher or 2 punching heads and is always in stock.
Click to see the Youtube video

Ask for our discount price and we will also include a tool box of 8 round punch & die sets and discounted shipping to most of USA.
Optional pipe bender, roll bender or shop press attachments available.

Click to Request Our Lower Discount Price and info packet

Edwards 55 ton Hydraulic Ironworker Machine with spare hydraulic powered cavity for optional tooling on right side
Has spare hydraulic powered jaw for optional tooling on the right side

Edwards 65 Ton "Jaws 5" Iron worker - Made in USA.
Click to read every detail about the Edwards 65 ton Ironworker Machine
3 weeks to build this machine.
9-3/4 " throat, 8-3/4 open height, 1-13/16 stroke
Punches 1-1/16 diameter thru 3/4 thick steel plate
or 1-9/16 dia thru 1/2 with oversize punch option.
Built in Plate Shear cuts 3/8 x 24" wide, 1/2 x 14", 1" x 4", 1-1/4 round
Built in Angle Shear cuts 5 x 5 x 1/4 angle or 4 x 4x 3/8 angle.
Built-in Coper-Notcher (2-1/2 x 6 x 3/8) included
Spare hydraulic powered window to power extra set of tooling.
Scroll down to see optional tooling below.
Weight: 3550 pounds.
Electrics: 220 Volts, 3 phase. Optional 440V or 220V, 1 phase

Ask for our discount price and we will also include a tool box of 8 round punch & die sets and discounted shipping to most of USA.
Optional pipe bender, roll bender or shop press attachments available.
Click to Request Our Lower Discount Price and info packet

Edwards 65 tonHydraulic Ironworker Machine with spare hydraulic powered tool cavity
Photo shows spare hydraulic powered cavity for optional tooling

100 Ton "Jaws 4" Edwards Ironworker - Made in USA.
Click to read every detail about the Edwards 100 ton Ironworker Machine
3 weeks to build this machine.
11" throat, 8-3/4 open height, 1-13/16 stroke
Punch 1-1/16" diameter thru 1" thick steel plate
or 1-9/16 dia thru 3/4 with oversize punch option.
Built in Flat Bar Shear cuts 3/4 x 14, 1" x 10", 1-1/4 round
Built in Angle Shear cuts 6 x 6 x 1/2 angle
Coper-Notcher 2-1/2 x 6 x 1/2 (optional)
2 versatile cavities power any 2 sets of tooling including 2 punch & dies.
Weight: 3700 pounds.
Electrics: 220 Volts, 3 phase. Optional 575V, 440V or 220V, 1 phase
Scroll down to see optional tooling below.
This 100 ton is a popular machine because it is strong, heavy, low priced, and can hold any two sets of tooling such as a punching head and pipe notcher or press brake and coper-notcher or 2 punching heads.

Ask for our discount price and we will also include a tool box of 8 round punch & die sets and discounted shipping to most of USA.
Optional pipe bender, roll bender or shop press attachments available.
Click to Request Our Lower Discount Price and info packet

Edwards 100 ton hydraulic Ironworker Machine with spare hydraulic powered tooling station.
Has spare hydraulic cavity for optional tooling on right side
Edwards 120 Ton "Jaws V" Hydraulic Ironworker
Click to read every detail about the Edwards 120 ton Ironworker Machine
Huge powerful machine with 11" throat, 9-1/8 open height, 2" stroke.
Punch 1-1/16 diameter thru 1" plate (1-1/2 dia with oversize punch option)
Built in Shear cuts 1/2" x 24", 1" x 12", or 1-1/4 square or round
Built in Angle Shear cuts 6 x 6 x 1/2 angle
Built-in Coper-Notcher (3 x 6 x 1/2) included
Spare hydraulic cavity to power extra set of tooling (see below).
Quick cycle time of 2.5 seconds.

Weight: 5500 pounds.
Electrics: 10 HP, 220 Volts, 3 phase. Optional 440V or 575Volts.
Optional 230 Volts 1 phase is special
Scroll down to see optional tooling below.
Made in USA
.

Ask for our discount price and we will also include a tool box of 8 round punch & die sets and discounted shipping to most of USA.
Optional pipe bender, roll bender or shop press attachments available.
Click to Request Our Lower Discount Price and info packet

Edwards 120 ton Ironworker Machine
Photo shows orange cover over spare hydraulic powered cavity.

Elite 110-65 Dual Operator 110 ton
Hydraulic Ironworker Machine

Super Dual Operator Ironworker Machine for heavy use.
Made in USA.
17.75" deep throat, 9-3/4 open height, 3" long stroke
Punches up to 1-3/8 diameter thru 1" steel plate with oversize option or 4" dia thru 5/16" plate.
Built in Shear cuts 3/8" x 24", or 1/2" x 14", or 1-1/4 square/round.
Built in Angle Shear cuts 5x 5x 1/4 angle.
Built-in Coper-Notcher (2.5 x 6 x 1/2) included.
Spare hydraulic cavity 11" wide for extra set of tooling such as press brake or pipe notcher.
This Dual Operator Machine has built in lighting, electric stroke control, hydraulic accessory ports (for pipe bender or hydraulic shop press), central lube system, UL listed controls and swing away stripper.
Weight: 6000 pounds.
Electrics: 7.5 HP, 220 Volts, 3 phase.
Optional 440V or 575V or 220V, 1 phase.
Scroll down to see optional tooling below.

Ask for our discount price and we will also include a tool box of 8 round punch & die sets and discounted shipping to most of USA.
Click to Request our Low Price and Info packet

Click for larger photo of the Edwards Elite 110-65 Dual Operator Hydraulic Ironworker Machine

Click for a Larger Photo of Elite 110-65 Machine

Hydraulic Powerlink Connector :
Made in USA. Included with Edwards Ironworkers 55 ton and larger; this allows you to easily plug in another machine to the hydraulic pump of your ironworker such as the pipe bender, 20 ton tabletop shop press, 40 ton, 60 ton, or 110 ton shop press, radius rolling machine or the horizontal press brake. It is too complicated to install this option on an existing machine so it is not sold separately.

Hydraulic accessory connector pack

Pipe Bender connects to your new Ironworker
Click to see the VIDEO THIS MACHINE IS NORMALLY IN STOCK.
Made in USA. Edwards Pipe Bender option requires the hose connection kit and labor at the factory to set up your newly purchased Ironworker machine to connect this pipe/tube bender.
Available as a stand alone with its own hydraulic power unit for extra cost.
* 2" (10) Schedule 40 Pipe Capacity
* 2-1/2" (00) .095" wall Tube Capacity
* 2-1/4" .083" Chromoly Capacity
* Cylinder 1-3/4" ram * Stroke 14"
* Heavy Duly All Steel Construction * Smooth, Fast operation * 180 Degree Bend Capacity * Easy To Use Hand Controls * Operates Horizontal or Vertically * Heavy Duty Rolling and Locking Stand * Auto Stop Feature For Repeatable Bends * Quick Disconnect Hoses
* Die Sets Sold Separately - click to see the huge list of die sets

Image of Edwards Pipe and Tube Bender

20 ton Shop Press connects to your new Ironworker

* Bench top size
* Made in USA
* Heavy duty all steel construction
* Easy to use hand controls
* Quick disconnect hoses
* Cylinder with 2 inch Ram, 6-1/4" stroke
* Width between frame columns: 20"
* Excellent table top machine

The 20 ton Shop Press is an option that connects to your new Edwards ironworker machine with the optional hydraulic accessory connector..

Optional Press Brake Tooling available: see below

Edwards 20 ton hydraulic shop press

Floor Shop Presses connect to your new Ironworker
* Made in USA
* Heavy duty all steel construction
* Easy to use hand controls
* Quick disconnect hoses
* Stroke: 12.25 inches
* Width inside frame: 40 ton: 38" / 60 ton: 42" / 110 ton: 48"
* Height inside frame: 40 ton 38" / 60 ton: 39" / 110 ton: 37"
* Optional Press Brake Tooling as seen in photo is 32 inch long, can bend 3/16 x 32", 1/4 x 24", 3/8 x 6" wide
* Optional PLC

The 40 ton, 60 ton and 110 ton Shop Presses are available as a plug in accessory to a new Edwards Ironworker machine that has the hydraulic accessory connector.

Optional Press Brake Tooling to change your shop press into a press brake:
12 inches long
18 inches long
24 inches long
32 inches long
36 inches long
40 inches long

Edwards 40 ton Hydraulic Press

Radius Rolling machine for pipe, tube, angle, flat bar.
Just connect it to your Ironworker machine:

Made in USA. Plug it into your Edwards Ironworker with the Hydraulic Accessory Connector or power it separately with an Edwards Porta-Power to expand your fabrication capabilities. The variable speed hydraulic drive allows you to dial in the appropriate speed for various materials. Quickly change the orientation from vertical for smaller projects to horizontal for those larger, heavier jobs
. The machine includes a set of flat rolls standard.
Capacities:
Angle Iron: 2 x 2 x 1/4.
Square Tube: 2 inch with 1/8" wall thickness.
Flat Bar: 4 x .75" easy way and 3/8 x 2 hard way
Round Pipe: 2" schedule 40 (optional rolls required)
Round Tube: 2.5" diameter with .095 wall thickness (optional rolls required)
Round Bar: 1.375" diameter (optional rolls required)

Edwards Radius Rolling machine
20 Ton Horizontal Press Brake connects to your new Ironworker machine:
Made in USA. This machine comes with standard V-die tooling for simple bends but you can also put other different tooling shapes on the vertical shafts of this machine to form, bend, and straighten metal. This machine can quickly connect to your Edwards Ironworker with a Hydraulic Accessory Connector or an Edwards Porta-Power to expand the fabrication abilities of your shop. Designed for maximum tooling flexibility, the 4 pin locations are locked with a simple crank for inboard tool squaring. Digital encoder reads positive stop for accurate repeatability within 0.01"
. Stroke: 10 inches. Work height: 38 inches.
Horizontal Press Brake
Edwards Iron worker Tooling: Made in USA.
Coper-Notcher, Angle-Notcher, Pipe Notcher, Press-Brake, Rod-Shear, Custom Channel-Shear, Spare Punching Assembly, Extra Large Punching Assembly, Quick Change Punch Coupling, Magnetic Bar Fence, Gaging Table, Pedestal Die Table, Picket making tooling and many sizes and styles of punch & die sets. Click to see a list of the Punch & Die Set Sizes. The 40 ton, 55 ton, 65 ton, 100 ton and 120 ton machines have a hydraulic powered spare tooling station to use almost any of the tooling shown or to use your own custom die set without having to unbolt the punching head. Only the 40 ton, 55 ton and 100 ton Jaws IV ironworkers have the option of holding 2 punching assemblies simultaneously (1 on each side). Custom tooling also available.

SCROLL DOWN TO SEE TOOLING PICTURES Click to see VIDEOS of the Edwards Tooling
Coper Notcher can act as an angle notcher when used at 45 degrees.
Coper-Notcher-Nibbler
Standard on 60, 65, 100 deluxe, 120 ton. Used for square, rectangular or angle V notching. Copes angle iron flanges.
Press Brake tooling photo
Press-Brake
Has 4-way style lower die. Has V die openings for bending metal 1/16, 1/8, 3/16, and 1/4" thick. Can bend 3/8".
Pipe Notcher shears pipe with a semi-circular cut to allow one pipe to fit perfectly against another. Very useful when making railings and tubular frames.
Pipe Notcher
Cuts pipe with a semi-circular cut to allow one pipe to fit 90° against another for railings. Sizes from 1/2 to 2" pipe.
Angle Notcher tooling picture
Vee-Notcher
3 x 3 V shaped notch up to 1/4 thick., but the Coper-Notcher also V notches
Heavy Duty Rod Shear photo
Rod-Shear
shears 1/4, 3/8, 1/2, 5/8, 3/4, 1"diameter rod cleanly and quickly
Pedestal Die Table is used when punching 2 inch size angle iron leg down. This is included with new Edwards 50 Ton thru 100 Ton Jaws 4 Ironworkers.
Pedestal Die Table
for punching 2"angle iron leg down. Included with most ironworkers
Gaging Table is for attaching jigs, fixtures and fences. It has threaded holes and dowel pin holes for accurate locating.
Large Gauging Table
For exact positioning. Includes 2 fences. Choose from 3/8" thick or 1" thick
Protractor Angle Gauge
Protractor Angle Gauge
Sets the pice part angle when shearing flat bar or when punching.
Urethane Stripper picture
Urethane Stripper
prevents distortion when punching soft aluminum, copper, brass, bronze, etc.
Picture of Adjustable Back Gauge
Adjustable Back Gauge
for setting repeat distances for punching holes, shearing angle and shearing flat bar.
Photo of Automatic Cutting Back Gauge
Automatic Cut Back Gauge
for setting repeat distances for punching or shearing. Automatically cuts without stepping on foot pedal.
Photo of Electric Stroke Control
Electric Stroke Control
Now included free with all our Ironworkers sizes 40 Ton and larger.
Image of Stripper Reducer
Stripper Reducer
minimizes distortion in thin metals when using smaller punches & dies
Picture of oversize Punching Assembly, 1-9/16 capacity - Note: safety guard removed for clarity
Oversize Punching Assembly includes oversize punch stem, nut, & die table for punching up to 1- 9/16" dia.
Picture of 241 oversize Punching Assembly, 4" capacity - Note: safety guard removed for clarity
241 Large Punching Assembly
for punching up to 4"diameter. Can also be used for corner radius notching.
Rotating Turret for using multiple pipe notchers
Rotating Turret
allows use of 3 pipe notcher sizes
Back gage to measure and position your bend when using the Press Brake Tool
Back Gage for press-brake
measures the position of your bend
Tool Box of 8 round Punch & Die Sets
Box of Punch & Die Sets
Free set of 8 with each Ironworker
Die Set to Flatten Tube and Punch a Hole
Flatten Tube & Punch a Hole
(custom made to your specs)

Louver Punching Die Set
Louver Punching Die Set
(custom made to your specs)

Corner Rounding Die Set
Corner Rounding Die Set
(custom made to your specs)

NOTE: Ironworker machines are very dangerous if used carelessly because they can crush fingers, hands, etc. Always keep hands, fingers, hair and clothing clear. Safety compliance is the users responsibility. Please take it seriously. *** Click for our Machinery Safety webpage ***.

Click for American Machine Tools Company Homepage

American Machine Tools Co.
5862 Northwest Hwy
Chicago IL 60631 USA

Phone: 773-334-5000
Fax: 773-442-0314

Click to email us

Safety

Privacy

Our Terms & Conditions

Frequently Asked Questions

Website by AmericanMachineTools
Copyright 2024
American Machine Tools Co.

All rights reserved
Information and prices on this website is subject to change without notice.
Offers from American Machine Tools Corporation include include Terms and Conditions shown on our website.
Liability is strictly limited to those warranties of fitness for purpose and safety as provided by the manufacturer.
Products and Logos in this website are trademarks or registered trademarks of their respective companies or mark holders.